Coin boxes are compact custom boxes sized to hold a single coin or a small set, usually with an insert that fixes each coin in place. TBPB makes them to your artwork with no minimum order, and the price-beat guarantee means a written quote for the same specs will be matched and beaten.
What a coin box actually has to do
A coin is small, dense and easy to scratch. The box has to keep it from sliding, keep the faces from touching anything hard, and make a small object feel like it deserves a ceremony. That is why the insert matters more than the carton around it. A coin simply dropped into an empty box rattles and arrives scuffed. We build coin boxes around a cut-out insert in foam, EVA or die-cut board, with a circular pocket for each coin, so the coin sits level and does not shift when the box is shaken.
Sizing: coin, capsule or both
Measure the coin diameter and thickness, then decide whether it will sit loose in the insert or inside a clear capsule. Challenge coins are commonly around 1.5 inches to 2 inches across and a few millimeters thick, but custom coins vary a lot, and a capsule adds a rim of its own. Always measure the coin or capsule you actually hold. The pocket is cut to that measurement with a small allowance so the coin drops in and lifts out without a fight. For several coins in one box, tell us the count and the layout you want, a row, a grid, or a stacked set. If you also need the foam made separately, see our custom foam inserts.
Printing and finishing a small surface
A small box lives or dies on its finish, because there is little area to hide behind. CMYK covers full-color artwork, and Pantone matching keeps a brand color exact. Matte lamination reads as understated and holds fingerprints less than gloss. Soft-touch lamination adds a velvet feel that suits military, commemorative and awards boxes. Foil stamping a unit crest or an emblem catches light on a dark box and tends to look sharper than printing the same detail in flat color. Keep type larger than you think you need, since very small text on a coin-size panel is hard to read.
Where a coin box is not the best fit
If the coin ships through the mail as part of an order, plan for an outer carton or a padded mailer, because a thin printed box on its own will not take a rough journey. For awards that go alongside a card or certificate, a business card box or a larger corporate gift box may suit the whole presentation better. Browse everything in the custom retail packaging category.
One more practical point: decide early whether the coin goes in loose or in a capsule, because the capsule rim changes the pocket depth and the lid clearance. Changing that after the dieline is drawn means starting the proof again.
- Fits a single coin, a capsule or a small set of coins
- Fitted insert: foam, EVA or die-cut board with round pockets
- Full-color CMYK or Pantone-matched printing
- Matte, gloss or soft-touch lamination, foil stamping and spot UV
- Printed inside surface and a lid or tuck closure, chosen for the use
Send the coin diameter, thickness, how many coins per box and the quantity, even if it is one. We draw the dieline and quote it.
Frequently asked questions
Is there a minimum order for custom coin boxes?
No. TBPB has no minimum order. You can order a single coin box for one award coin or thousands for an event, and both go through the same process: you send the coin size and quantity, and we draw the dieline and quote it.
How do I size a box for challenge coins?
Measure the coin’s diameter and thickness, and the capsule if you use one. The insert pocket is cut slightly larger than that so the coin drops in easily and does not rattle. Tell us how many coins go in each box and the layout you want.
Can one box hold several coins?
Yes. We can build the insert with multiple round pockets in a row or a grid, or hold coins at different depths in a stacked set. Tell us the count and any special pieces such as a certificate, and we will plan the layout.
What insert material protects a coin best?
Foam or EVA with a round cutout holds the coin snugly and keeps the faces off hard surfaces. Die-cut board also works and is easier to recycle. For polished or proof finishes, a soft insert or a capsule is the safer choice.
Can I print a unit crest or logo in foil?
Yes. Foil stamping is available for logos and crests on the lid or sides. Keep fine lines at a reasonable thickness, because very thin strokes can fill in. A dark box with a foil emblem is a classic combination for commemorative coins.
Will the box survive being mailed on its own?
A thin printed box can get crushed in a parcel. If the coin box will be mailed, put it inside a padded mailer or a corrugated carton. That protects the corners and artwork while the inner insert protects the coin itself.
More Custom Retail Packaging
See the full Custom Retail Packaging range, or explore related options with no minimum order and our best-price guarantee:
