Pre-roll packaging is the tube, box, or sleeve that holds one or more rolled joints, blunts, or cones for sale. Dispensaries, hemp brands, and pre-roll makers buy it printed with their logo and the label text their market requires. Every order is made to your pre-roll length and count with no minimum order, and TBPB beats a written quote for the same specs. Start with pre-roll packaging boxes for standard joints, CBD pre-roll boxes for hemp products, or blunt packaging for larger rolls. Send the roll length and a quantity, even one, and we return a dieline and quote.
A pre-roll box is only as good as its fit. A standard joint runs around 80 to 110 mm; a king-size runs longer, and blunts are both longer and wider. A box that is a few millimeters too short crushes the filter end, and one that is too long lets the roll slide and break at the tip. Measure the longest roll you sell, with the crutch or tip, and send the length, the diameter, and how many rolls go in each box. A single-roll sleeve and a five-pack tray are different dielines even if the roll is the same.
A narrow tuck-end box suits one or two joints. A slide-out tray in a sleeve suits three to five and feels like a retail product. A longer carton with dividers holds ten to twenty for dispensary counters. Cones need small insert pockets so the filled end stays upright. If you need something that hangs on a peg or sits in a counter display, ask for a display carton. For blunt rolls and wider rolls, see joint packaging and the blunt option above.
Pre-rolls are fragile, so board thickness matters more than printing. A thicker folding board resists crushing in a bag. An insert that cradles the roll prevents it from drumming against the walls. Matte finishes look clean, and spot gloss on the logo adds contrast without much cost. If aroma matters, a sealed inner wrap or tube does that job better than a box.
Pre-rolls sold in licensed cannabis markets fall under state packaging rules, and hemp pre-rolls fall under different ones. The buyer supplies required text, warnings, and symbols and confirms any child-resistant requirement. We print supplied artwork and do not claim child-resistant certification; product names in the catalog describe the format, not a rating.
For jar and flower cartons, see cannabis packaging. For paper-wrapped tobacco-style packs, cigarette boxes are built for that shape. For sealed pouches, check mylar bags.
Send roll length, diameter, pack count, quantity, and your artwork. One box is fine for fit testing. We return a dieline to check against a real roll before printing.
No. Order one box to test or tens of thousands for a production run. Size and print are the same either way.
Measure the longest roll with its tip, plus its diameter, then send those numbers with your pack count. We build the box to fit rather than offer one generic size.
Yes. Trays, dividers, and sleeves hold from one roll to a full counter pack. Tell us how many go in each box.
We do not claim certification. If your state requires child-resistant packaging, confirm the standard and use a separately tested closure. Compliance is the buyer responsibility.
Yes. Send the final artwork and we print it as supplied. We do not write or verify regulatory text.
Send a written quote for the same size, material, and quantity. We aim to beat it and will say so plainly if we cannot.
